Material Solutions
GarCo offers development and fabrication services for custom applications. If you have a development project, GarCo has your solution.
Thermoglass™ Flat Knitted Tape
Amatex ThermoglassTM flat knitted tapes employs a unique knitted construction that offers specific advantages over woven tape in certain applications. Knit tape is easy to wrap, very flexible causing little buckling and due to its construction it is very durable under abrasive conditions.
Thermoglass™Square Knitted Rope & Knitted Tape
Amatex Thermoglass knitted ropes are made in numerous sizes and densities to meet most end uses. If you require a compressible rope with good elastic properties or if you require a denser rope for a firmer seal, we can fill your needs. Knitted tapes are used for sealing flat surfaces and as gaskets on stove windows. Square Ropes are specialty products for special end uses.
Thermoglass™ Woven Window Gaskets
Amatex ThermoglassTM woven gasket of high quality designed for accurate fit. Available in plain white, black graphite finish, and with pressure sensitive adhesive backing.
Thermoglass™ Channel & Tadpole Window Gaskets
Amatex ThermoglassTM high quality gaskets are designed for accurate fit. They are made in a variety of widths and thicknesses , and in natural white or black graphite to meet any window sealing need.
Stainless Steel Chimneys (Single Wall)
Single wall stainless steel exhaust systems ideal for relining or and connection pipes
Flue Gas Ducts
Flue gas ducts are made for a robust and safe connection solution between the boiler-/engine outlet and the chimney entrance.
Ventilation Towers
Our ventilation towers combine high functionality and elegant design in an impressive way.
Exhaust Gas Silencers
For the industrial sector the Jeremias Group also offers a wide range of robust flue gas silencers.
Venting Accessories
Accessories for chimneys, stainless steel exhaust systems and flue pipes including dampers and relief valves.
Stainless Steel Chimneys (Double Wall)
Insulated exhaust systems made of stainless steel
Jeremias Exhaust Systems
Jeremias is one of the world`s leading manufacturers of flue and chimney systems for the exhaust of gases and ventilation, covering all kinds of domestic, commercial and industrial applications.
Aerocel® AC
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines.
Aerocel® Continuous Tube
Aerocel® continuous tube pipe insulation is used to retard heat gain and control condensation drip from cold water plumbing, chilled water, and refrigeration lines.
Everseal™
EVERSEAL™ INSULATION TAPE is an effective sound dampening material, and it can also be used for gasketing purposes.
Protape®
Protape® is a EPDM-based self-adhering rubber tape, specifically designed for adhering the joints of Aerocel tubes and sheets.
Aerocel Aerotape™
Aerotape™ is ideal for wrapping hot and cold pipe, tubing and fittings. Aerotape™ is easy to use and prevents condensation.
Aerocel Aerocoat™
Aerocel Aerocoat™ is a pure acrylic emulsion water based latex paint especially designed for use with Aerocel insulation products. Aerocel Aerocoat™ has superb properties that help protect against ultraviolet rays and other adverse weather conditions.
Aeroseal LVOC™
Aerocel® Aeroseal LVOC™ adhesive is a synthetic rubber base contact adhesive formulated for bonding Aerocel® insulating materials firmly together as well as bonding Aerocel® insulation to other substrates. Aeroseal LVOC™ adhesive is specially formulated to meet the VOC content requirement of LEED® for special purpose contact adhesives and SCAQMD Rule 1168
Aerocel Aeroseal™
Aeroseal™ adhesive (amber or black in color) is a modified neoprene contact adhesive specially formulated for bonding Aerocel insulating materials firmly together.
Aerocel Aerofix-U®
Aerofix-U® is designed for providing a high-strength, load-bearing insulation that will not compress or crush under loads imposed by active piping systems and their contents resting on the insulation material between the pipe and the pipe hanger.
Aerocel® AeroFit
Aerocel® AeroFit™ Insulating Fitting Covers are designed for insulating warm or cold piping fittings without the need to field-fabricate these shapes, saving labor and providing enhanced project performance.
Aerocel® AeroTuff Laminated Sheet
Laminated EPDM Elastomeric Sheet Insulation is a flexible closed cell and lightweight elastomeric material designed for insulating large pipes, tanks, vessels, air ducts, inside air handling panels and more.
SaniGuard™
Aerocel® EPDM Pipe Insulation with SaniGuard™ is designed for insulating warm or cold piping in applications where exceptional cleanliness during operation is required.
Aerocel® White/Gray
Aerocel White/Gray 25/50 Tubular lnsulation is a flexible, closed cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 1/2″, 3/4″ and 1″, 1-1/2″ and 2″ wall, in popular I.D. sizes up to 6-5/8″. The closed-cell structure of Aerocel Pipe lnsulation makes it an efficient insulation.
Aerocel-SSPT®
Aerocel® Stay-Seal® with Protape® (SSPT) Tube lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines.
Amatex Corporation – Laconia
Amatex-Laconia (formerly NorFab Corporation) manufactures textile products using Kevlar, Nomex, Basofil, Kynol, carbon fibers, FR rayon and other technical fibers for high temperature applications and personal protection including broad woven cloth and narrow products including tape, rope, gasketing and more.
Aerocel® EPDM Sheet
Aerocel® EPDM Elastomeric Sheet Insulation is a flexible closed cell and lightweight elastomeric material with a smooth and durable surface, designed for insulating air ducts internally and externally, air handling cabinets, air terminal devices, and more.
Basalt Tape
Basalt, an igneous rock with origins to molten lava, is spun into fibers and assembled as yarns that are expertly woven into Amatex Basalt Fiber Tape. These tapes take advantage … Continue reading
Aluminum Lockdown Rings
Where hot work is not allowed, you may use tin snips to cut the hole in the jacketing and install this optional aluminum lock down ring over the flange for … Continue reading
PET (Polyester) Packaging Tapes
Product Adhesive Application Data Sheet monta pack 370 Natural Rubber Packing Data Sheet monta pack 376 Natural Rubber Packing Data Sheet monta pack 623F Acrylic Water Dispersion Marking, Packing Data … Continue reading
Paper & Cloth Packaging Tapes
Product Backing Adhesive Application Data Sheet monta krepp 432 High Crepe Synthetic Rubber* Protecting Data Sheet monta krepp 475 Masking Natural Rubber Protecting, Packing Data Sheet monta krepp 476 Masking … Continue reading
BOPP Packaging Tapes
Product Adhesive Application Data Sheet monta pack 301 Synthetic Rubber (Hotmelt) Packing Data Sheet monta pack 303 Synthetic Rubber (Hotmelt) Packing Data Sheet monta pack 305 Synthetic Rubber (Hotmelt) Packing … Continue reading
PVC Packaging Tapes
Product Adhesive Application Data Sheet monta pack 124 Natural Rubber Printing, Packing Data Sheet monta pack 200 Natural Rubber Printing, Packing Data Sheet monta pack 201 Natural Rubber Printing, Packing … Continue reading
MOPP & BOPP Strapping Tape
Product Backing Adhesive Application Data Sheet monta pack 340 MOPP Natural Rubber Palettizing, Bundling, Packing Data Sheet monta pack 340F colors MOPP Natural Rubber Palettizing, Bundling, Packing Data Sheet monta … Continue reading
Aramid Twisted Rope
Twisted strands of soft, pliable Norfab fibers (wicking) provide a general utility product with varied industry applications. It makes excellent packing for steam valves, and metal wipe in tinning and … Continue reading
Aramid Cord
NOR*FAB cord may be used as tie-down cables in motors and generator armatures, for gasketing, for wipes in wire tinning, insulation on glass handling equipment and as seals in metal … Continue reading
Aramid Wick
Twisted strands of soft, pliable Norfab fibers (wicking) provide a general utility product with varied industry applications. It makes excellent packing for steam valves, and metal wipe in tinning and … Continue reading
Aramid Braided Packing
Made in two types for a variety of industrial applications: braided NOR*FAB jacket over a NOR*FAB cope core for lighter weight, greater flexibility and resiliency or over a fiberglass rope … Continue reading
Aramid Sleeving
Braided Sleeving NOR*FAB Series 400 braided sleeving is manufactured in one style and two wall thicknesses. It is made using para-aramid fibers spun over a strong fiberglass core yarn. These … Continue reading
CHOICE™ Aluminized Fabrics
The CHOICE™ line of aluminized fabrics meets and exceeds all the key protection standards typically associated with the use of aluminized fabrics for reflection of radiant heat and the shedding … Continue reading
Aluminized Aramid Fabrics
Specialty engineered aluminized fabrics for personal protection from: radiant heat, molten metal, flame, high temperature steam, sunlight shielding. Brochure Style Fiber Type Weight oz/yd2 Data Sheet 05TT229-AL1 PBI ®/Kevlar®/Anti-Stat Fiber … Continue reading
Kevlar® Fabric
08TT132 A Norfab 100% Kevlar® light weight fabric woven in a twill pattern. Applications include safety clothing, aprons, cuffs, sleeves, capes and pockets. Data Sheet
DREF Spun Woven Fabric
NorFab Series 400 08PT22 A Norfab woven light weight fabric of Aramid fiber blend over a fiberglass core yarn, wear resist coated. Applications include safety clothing, curtains, heat shields, filtration … Continue reading
OMNI Quilt™
07OQ2PB A Norfab high performance thermal liner constructed of three fabric layers quilted in a 2 inch diamond pattern with natural Nomex® thread. The first layer is a blue dyed woven … Continue reading
Industrial Yarns
NOR*FAB industrial yarns are manufactured from a broad range of fiber types and are often supplied as plied yarns ranging from 2 to 8 plies. The yarns listed on this … Continue reading
Personal Safety Specialty DREF Corespun Yarns
Producing the finest count corespun yarns available with the DREF system, DREF III yarns are used in fine woven and knitted fabrics for cut protection and thermal insulation. Lightweight NOR*FAB … Continue reading
Aramid Tapes
Norfab Series 400 quality tapes are carefully woven and sized using Para-Aramid fibers on fiberglass core yarn. The tapes are then specially inspected, rolled and wrapped to prevent contamination. Applications … Continue reading