Aerocel® ULP® Ultra-Low Permeance Sheet & Roll
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines.
Aerocel® ULP® Ultra-Low Permeance
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines.
Pipe Guides, Slides & Anchors
The use of ‘PS Series’ pipe slides along with the ‘PG Series’ pipe guides assures that the critical ‘bottom of pipe’ (BOP) to ‘top of steel’ (TOS) dimension stays constant throughout the system.
Custom Shields
Value Engineered Products offers a large variety of stock products. However, every application has its own set of unique needs and sometimes stock sizes and features do not meet the installation requirements. VEP has the unique ability to customize any product to suit your engineering needs.
Insulation Protection Shields
All insulation systems require steel shields either with or without high-density inserts to be installed at each point pipes are to be supported.
MaxSpan & MaxSpan RH
The MaxSpan R.H. thermal hanger shield is specifically designed to provide a superior safety margin for pipe mounted on pipe rollers, flat surfaces or with supports where point loading may be a concern.
Quik-Shield
Quik-Shields are economically priced 180 degree thermal hanger shields providing a continuous section of insulation and factory applied jacketing.
Pro-Shield
Pro-Shields are 360 degree thermal hanger shields designed to meet the broadest range of pipe support applications.
Seismic Shield™
Seismic Shield™ (Patent Pending) is an innovative insulation protection shield. This product is designed to stop shield movement and rotation while allowing for expansion and contraction of piping systems.
WeatherShield
WeatherShield modifications are appropriate for hostile environment or outdoor applications.
Chill-Shields
Chill-Shields are 360o thermal hanger shields designed to meet pipe support applications on low temperature lines. The Chill-Shield Z.P. incorporates a zero perm factory applied jacketing to comply with the most stringent requirements of cryogenic systems.
Material Solutions
GarCo offers development and fabrication services for custom applications. If you have a development project, GarCo has your solution.
Stainless Steel Chimneys (Single Wall)
Single wall stainless steel exhaust systems ideal for relining or and connection pipes
Flue Gas Ducts
Flue gas ducts are made for a robust and safe connection solution between the boiler-/engine outlet and the chimney entrance.
Ventilation Towers
Our ventilation towers combine high functionality and elegant design in an impressive way.
Exhaust Gas Silencers
For the industrial sector the Jeremias Group also offers a wide range of robust flue gas silencers.
Venting Accessories
Accessories for chimneys, stainless steel exhaust systems and flue pipes including dampers and relief valves.
Stainless Steel Chimneys (Double Wall)
Insulated exhaust systems made of stainless steel
Aerocel® AC
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines.
Aerocel® Continuous Tube
Aerocel® continuous tube pipe insulation is used to retard heat gain and control condensation drip from cold water plumbing, chilled water, and refrigeration lines.
Everseal™
EVERSEAL™ INSULATION TAPE is an effective sound dampening material, and it can also be used for gasketing purposes.
Protape®
Protape® is a EPDM-based self-adhering rubber tape, specifically designed for adhering the joints of Aerocel tubes and sheets.
Aerocel Aerotape™
Aerotape™ is ideal for wrapping hot and cold pipe, tubing and fittings. Aerotape™ is easy to use and prevents condensation.
Aerocel Aerocoat™
Aerocel Aerocoat™ is a pure acrylic emulsion water based latex paint especially designed for use with Aerocel insulation products. Aerocel Aerocoat™ has superb properties that help protect against ultraviolet rays and other adverse weather conditions.
Aeroseal LVOC™
Aerocel® Aeroseal LVOC™ adhesive is a synthetic rubber base contact adhesive formulated for bonding Aerocel® insulating materials firmly together as well as bonding Aerocel® insulation to other substrates. Aeroseal LVOC™ adhesive is specially formulated to meet the VOC content requirement of LEED® for special purpose contact adhesives and SCAQMD Rule 1168
Aerocel Aeroseal™
Aeroseal™ adhesive (amber or black in color) is a modified neoprene contact adhesive specially formulated for bonding Aerocel insulating materials firmly together.
Aerocel Aerofix-U®
Aerofix-U® is designed for providing a high-strength, load-bearing insulation that will not compress or crush under loads imposed by active piping systems and their contents resting on the insulation material between the pipe and the pipe hanger.
Aerocel® AeroFit
Aerocel® AeroFit™ Insulating Fitting Covers are designed for insulating warm or cold piping fittings without the need to field-fabricate these shapes, saving labor and providing enhanced project performance.
Aerocel® AeroTuff Laminated Sheet
Laminated EPDM Elastomeric Sheet Insulation is a flexible closed cell and lightweight elastomeric material designed for insulating large pipes, tanks, vessels, air ducts, inside air handling panels and more.
SaniGuard™
Aerocel® EPDM Pipe Insulation with SaniGuard™ is designed for insulating warm or cold piping in applications where exceptional cleanliness during operation is required.
Aerocel® White/Gray
Aerocel White/Gray 25/50 Tubular lnsulation is a flexible, closed cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 1/2″, 3/4″ and 1″, 1-1/2″ and 2″ wall, in popular I.D. sizes up to 6-5/8″. The closed-cell structure of Aerocel Pipe lnsulation makes it an efficient insulation.
Aerocel-SSPT®
Aerocel® Stay-Seal® with Protape® (SSPT) Tube lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines.
Aerocel® EPDM Sheet
Aerocel® EPDM Elastomeric Sheet Insulation is a flexible closed cell and lightweight elastomeric material with a smooth and durable surface, designed for insulating air ducts internally and externally, air handling cabinets, air terminal devices, and more.
Ideal Seal 777 Jacketing/Cladding
A high performance 6-ply laminate that provides a total vapor barrier and complete moisture protection for insulation cladding and jacketing applications. Cold Seal acrylic adhesive.
791 Cold Seal FSK Tape
All Weather FSK Tape with Acrylic adhesive system. UL® 723 Rated. Data Sheet MSDS
788S Cold Seal Foil Tape
2-mil Premium Aluminum All Weather Foil Tape with acrylic adhesive system. UL 723 Rated. Data Sheet MSDS
Ideal Seal® 2000 Foil Tape
Ideal Seal™ 2000 is a performance grade aluminum foil tape coated with an acrylic adhesive system that meets both UL 181A-P and UL 181B-FX. Data Sheet MSDS Warranty
469 Standard Grade Duct Tape
Standard grade polyethylene coated cloth tape with an aggressive rubber pressure sensitive. 10-Mil. Data Sheet
491 Industrial Grade FSK Tape
Industrial Grade FSK (foil, scrim and kraft) tape combined with a pressure sensitive rubber adhesive and release liner. Data Sheet MSDS
488S AWF Foil Tape
1.5 mil aluminum foil backing and a performance rubber based adhesive system. UL 723 Rated. Data Sheet MSDS
488 AWF Foil Tape
Ideal Tape’s 488 AWF is a pressure sensitive tape manufactured with a 2 mil aluminum foil backing and a performance rubber adhesive system. UL 723 Rated. Data Sheet MSDS