Aerocel® ULP® Ultra-Low Permeance Sheet & Roll
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines.
Aerocel® ULP® Ultra-Low Permeance
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines.
Pipe Guides, Slides & Anchors
The use of ‘PS Series’ pipe slides along with the ‘PG Series’ pipe guides assures that the critical ‘bottom of pipe’ (BOP) to ‘top of steel’ (TOS) dimension stays constant throughout the system.
Custom Shields
Value Engineered Products offers a large variety of stock products. However, every application has its own set of unique needs and sometimes stock sizes and features do not meet the installation requirements. VEP has the unique ability to customize any product to suit your engineering needs.
Insulation Protection Shields
All insulation systems require steel shields either with or without high-density inserts to be installed at each point pipes are to be supported.
MaxSpan & MaxSpan RH
The MaxSpan R.H. thermal hanger shield is specifically designed to provide a superior safety margin for pipe mounted on pipe rollers, flat surfaces or with supports where point loading may be a concern.
Quik-Shield
Quik-Shields are economically priced 180 degree thermal hanger shields providing a continuous section of insulation and factory applied jacketing.
Pro-Shield
Pro-Shields are 360 degree thermal hanger shields designed to meet the broadest range of pipe support applications.
Seismic Shield™
Seismic Shield™ (Patent Pending) is an innovative insulation protection shield. This product is designed to stop shield movement and rotation while allowing for expansion and contraction of piping systems.
WeatherShield
WeatherShield modifications are appropriate for hostile environment or outdoor applications.
Chill-Shields
Chill-Shields are 360o thermal hanger shields designed to meet pipe support applications on low temperature lines. The Chill-Shield Z.P. incorporates a zero perm factory applied jacketing to comply with the most stringent requirements of cryogenic systems.
Material Solutions
GarCo offers development and fabrication services for custom applications. If you have a development project, GarCo has your solution.
Aerocel® AC
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines.
Aerocel® Continuous Tube
Aerocel® continuous tube pipe insulation is used to retard heat gain and control condensation drip from cold water plumbing, chilled water, and refrigeration lines.
Aerocel Aerofix-U®
Aerofix-U® is designed for providing a high-strength, load-bearing insulation that will not compress or crush under loads imposed by active piping systems and their contents resting on the insulation material between the pipe and the pipe hanger.
Aerocel® AeroFit
Aerocel® AeroFit™ Insulating Fitting Covers are designed for insulating warm or cold piping fittings without the need to field-fabricate these shapes, saving labor and providing enhanced project performance.
Aerocel® AeroTuff Laminated Sheet
Laminated EPDM Elastomeric Sheet Insulation is a flexible closed cell and lightweight elastomeric material designed for insulating large pipes, tanks, vessels, air ducts, inside air handling panels and more.
SaniGuard™
Aerocel® EPDM Pipe Insulation with SaniGuard™ is designed for insulating warm or cold piping in applications where exceptional cleanliness during operation is required.
Aerocel® White/Gray
Aerocel White/Gray 25/50 Tubular lnsulation is a flexible, closed cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 1/2″, 3/4″ and 1″, 1-1/2″ and 2″ wall, in popular I.D. sizes up to 6-5/8″. The closed-cell structure of Aerocel Pipe lnsulation makes it an efficient insulation.
Aerocel-SSPT®
Aerocel® Stay-Seal® with Protape® (SSPT) Tube lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines.
Aerocel® EPDM Sheet
Aerocel® EPDM Elastomeric Sheet Insulation is a flexible closed cell and lightweight elastomeric material with a smooth and durable surface, designed for insulating air ducts internally and externally, air handling cabinets, air terminal devices, and more.
Aluminum Lockdown Rings
Where hot work is not allowed, you may use tin snips to cut the hole in the jacketing and install this optional aluminum lock down ring over the flange for … Continue reading
Industrial Yarns
NOR*FAB industrial yarns are manufactured from a broad range of fiber types and are often supplied as plied yarns ranging from 2 to 8 plies. The yarns listed on this … Continue reading
Aramid Tapes
Norfab Series 400 quality tapes are carefully woven and sized using Para-Aramid fibers on fiberglass core yarn. The tapes are then specially inspected, rolled and wrapped to prevent contamination. Applications … Continue reading
Silica Cloth
AMATEX Silica cloth is a woven continuous filament amorphous silica fabric. Applications include pad fabrics, expansion joints, valve covers, special curtain materials. Resistant to most chemicals, good thermal protection to … Continue reading
Needled Silica Mat
AMA-SILMAT is comprised of an assortment of long glass fibers randomly oriented into a uniform blanket. Applications include insulation matting for high temperature insulation blankets and sound suppression. Available in … Continue reading
Premium Quality Thermoglass Tape
Amatex premium quality tapes are carefully woven and sized using fiberglass yarns. Applications include lagging of all types, pipe insulation wrap, electrical insulation, and thermal insulation. Resistant to most chemicals, … Continue reading
Wire Inserted Fiberglass Cloth
G24PUU 24-oz Stainless Steel Wire Inserted Fiberglass Cloth. 60-in width. Data Sheet
PTFE Coated Fiberglass Cloth
G17TFL A 17.0-oz woven fiberglass fabric of a medium weight, crowfoot weave coated with PTFE in a gray color, 1 side, clear other side. 60-in width. Data Sheet
Silicone Coated Fiberglass Cloth
G15SIL 15-oz Silicone Coated Fiberglass Cloth. A light weight fiberglass woven fabric with a silver-gray silicone rubber. 60-in width. Data Sheet G17SIL* 17-oz Silicone Coated Fiberglass Cloth. A woven fiberglass … Continue reading
Rewettable Fiberglass Cloth
G09P7G An AMATEX woven thermoglass light weight fabric coated with a rewettable fabrication adhesive. 60-in width. Data Sheet
Acrylic Rubber Coated Fiberglass Cloth
G19P33 -YL or -BK 22-oz woven Thermoglass fabric coated with yellow or black acrylic rubber on one side. 40-in and 60-in widths. Data Sheet
Neoprene Coated Fiberglass Cloth
G22P34 -YL or -BK 24-oz woven heavier Thermoglass fabric, dyed yellow or black, one side coated with yellow FR Neoprene. 60-in and 72-in widths. Data Sheet
Padmaster
Padmaster 20 20-oz Padmaster Fiberglass Insulation Pad Cloth specifically designed for maximum heat suppression for generators, etc. 40-in and 60-in widths. Data Sheet SDS Padmaster 26 26-oz Padmaster Fiberglass Insulation … Continue reading
Vertex Coated Fiberglass Cloth
Industrial quality Vertex (Vermiculite coated) Fiberglass Cloth G64PFF -7B or -7N 64-oz. Available in Blue or Natural Vertex. 40-in and 60-in widths. Data Sheet G40PAE-7B 40-oz. Blue Vertex Fiberglass Cloth. … Continue reading
Needled Glass Fiber Mat
AMAMAT Fiberglass Insulation Mat. Available in 1/8-in, 1/4-in, 1/2-in, 3/4-in and 1-inch thickness. 60-in width. Data Sheet
Aluminized Fiberglass Cloth
G19P33-31-AL3* 18.5-oz Aluminized Fiberglass Cloth (0.001-in Foil). 48-in and 58-in widths. Data Sheet G22P34-AL1 22-oz Aluminized Fiberglass Cloth (Mylar Film). 40-in width. Data Sheet G24PBB-AL1 24-oz Aluminized Fiberglass Cloth (Mylar … Continue reading
Industrial Fiberglass Cloth
G24PBB 24-oz woven roving thermoglass fabric of a medium weight in a plain weave. 40-in and 60-in widths. Data Sheet G30PAB 30-oz woven roving thermoglass fabric of a heavier weight … Continue reading
Premium S2 Fiberglass Cloth
G19PS2 19-oz high tensile strength thermoglass fabric in loom stage white, uses Ballistic Quality S-2 glass. 60-in width. Data Sheet
Premium Fiberglass Cloth
G09P77 8.5-oz Premium Quality Thermoglass Fabric. Heat treated to a natural tan shade, or dyed red. Complies to MIL-C-20079 and USCG164.009. 40-in width. Data Sheet G12P73 12-oz Premium Quality Fiberglass … Continue reading
Knitted Wire Mesh
Stainless Steel 55-2290-4350-01* 0.011-mil 304 Stainless Steel Wire Mesh, uncrimped. 30-in width. 55-2294-4350-01 0.011-mil 304 Stainless Steel Wire Mesh, crimped. 30-in width. 55-2290-4480-01 0.011-mil 304 Stainless Steel Wire Mesh, uncrimped. … Continue reading
Foil
Materials Copper Stainless Steel Aluminum Inconel Tin Tin-plated Copper Specialty Metals in both foil and sheet gauges Please contact us to discuss your requirements and we can recommend which product(s) … Continue reading