Designed to provide a superior safety margin when supporting pipe with longer hanger spans by utilizing heavier gauge shields and Type 2 calcium silicate. Ideal for chilled to steam piping and dual temperature lines.
Operating temperatures: -250°F to +225°F |
Pipe diameters: 1/2 inch through 24 inches |
Insulation thickness: 1/2 inch through 4 inches |
Designed to provide a superior safety margin for pipe mounted on pipe rollers, flat surfaces or with supports where point loading may be a concern. These rugged units allow hanger spans up to the maximum allowed in Table 3 of the MSS SP-69. They are appropriate for either hot or cold pipe systems.
Units for pipe 4” and larger include a wear/weight distribution plate of carbon steel (primer painted). Additionally, a segment of ultra high density, 900 PSI calcium silicate is fabricated into units for 10” pipe size and larger.
Pipe diameters: 1/2 inch through 24 inches |
Insulation thickness: 1/2 inch through 4 inches |
The MaxSpan & MaxSpan R.H. meets or exceeds the MSS standard for Type 40 Shields per MSS SP‑58, Paragraph 9.2.2. MaxSpan R.H. meets the ASTM E84 Standard Flame Spread -5-, Smoke Developed -5-.
You must be logged in to post a comment.