A Material Solutions Company
Closed Cell Elastomeric Thermal lnsulation for HVAC & Refrigeration
Aerocel EPDM Tube and Sheet lnsulation is a flexible, closed-cell and light weight EPDM* based elastomeric material designed for insulating liquid cooling and heating lines. 3/8″, 1/2″, 3/4″, 1″ 1-1/4″, 1-1/2″ and 2″ wall in popular I.D. sizes from 1/4″ ID up to 16″ ID. The closed-cell structure of Aerocel Pipe lnsulation makes it the most efficient elastomeric insulation.
Aerocel EPDM is manufactured to consistently provide tested values – not theoretical calculations – on these key performance criteria for mechanical system insulation:
Thermal Conductivity: 0.245
Water Vapor transmission: 0.03
Fire Rating: Will not contribute significantly to fire (simulated end-use testing).
Aerocel Pipe lnsulation in 3/8″, 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″ and 2″ thicknesses has a flame spread rating of 25 or less and a smoke developed rating of 50 or less as tested by ASTM E 84 “Surface Burning Characteristics of Building Materials.”
Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified.
Aerocel EPDM Pipe lnsulation is used to retard heat gain and control condensation drip from cold-water plumbing, chilled water, and refrigeration lines. It also efficiently reduces heat flow for hot water plumbing, liquid heating and dual temperature piping. The recommended temperature usage range for Aerocel EPDM Pipe lnsulation is -70°F to +300°F ( -183°C to +149°C) CONTINUOUS. Our current specification sheet is incorrect on this subject and we apologize for the oversight of providing the correct range in degree Celsius units. When re-published, our new specification sheet will reflect the corrected service temperature range for the degree Celsius temperature unit system.
The closed-cell structure of Aerocel EPDM lnsulation effectively retards the flow of moisture vapor, and Aerocel EPDM is considered a low transmittance vapor retarder. Aerocel EPDM requires no supplemental vapor retarder protection.
Note: Numerical flammability ratings alone may not define the performance under actual fire conditions. They are provided only for use in the selection of products to meet limits specified. 25/50 rated Versatile for heating, AC, refrigeration and plumbing.
Aerocel EPDM Pipe Insulation in unslit tubular form can be slipped onto piping before it is connected, or it can be slit lengthwise and snapped over piping already connected. Butt joints and seams are to be sealed with contact adhesive; therefore, both surfaces to be joined are coated with adhesive. Aerocel is designed for installation above and below ground, indoors and outdoors. No protective finish is required.
In addition to the specifications listed below, Aerocel EPDM also conforms to the following: ASTM C 534, ASTM D 1056, NY City MEA #171-04-M, City of LA RR-8413, UL 181 Section 12 Mold GrowthIHumidity, UL 181 Section 17 Air Erosion, UL 94 5 V-0, UL 723, NFPA 90A & 90B, MIL l528OJ.